Magnetic Effect of Electric Current means that an electric current flowing in a wire produces a magnetic field around it.

**Oersted’s Experiment**

The direction of this magnetic field can be obtained by Ampere’s swimming rule.

SI unit of magnetic field is Wm

The strength of magnetic field is called one tesla, if a charge of one coulomb, when moving with a velocity of 1 ms

1 tesla (T) = 1 weber metre

= 1 newton ampere

CGS units of magnetic field are called gauss or oersted.

1 gauss = 10

If a right handed cork screw is imagined to be rotated in such a direction that tip of the screw points in the direction of the current, then direction of rotation of thumb gives the direction of magnetic line of force.

The conventional sign for a magnetic field coming out of the plane and normal to it is a dot i.e.,

The magnetic field perpendicular to the plane in the downward action is denoted by ®.

If a man is swimming along the wire in the direction of current his face turned towards the needle, so that the current enters through his feet, then north pole of the magnetic needle will be deflected towards his left hand.

The space in the surrounding of a magnet or any current carrying conductor in which its magnetic influence can be experienced.

The magnetic field produced by a current carrying element of length dl, carrying current I at a point separated by a distance r is given by

dB = μ

or dB = μ

where, θ is the angle between the direction of the current and μ

SI unit of magnetic field is Wm

The direction of magnetic field dB is that of I dl * r .

where φ1 and φ2 are angles, which the lines joining the two ends of the conductor to the observation point make with the perpendicular from the observation point to the conductor.

For infinite length conductor and observation point is near the centre of the conductor,

B = μ

for infinite length conductor and observation point is near one end of the conductor,

B = μ

- They are used to res present magnetic B field in a region.
- They are closed continuous curves.
- Tangent drawn at any point gives the direction of magnetic field.
- They cannot interact.
- Outside a magnet, they are directed from north to south pole and inside a magnet they are directed from south to north.

The direction of magnetic field lines can be obtained by Right Hand Thumb Rule

If we hold a current carrying conductor in the grip of the right hand in such a way that thumb points in the direction of current, then curling of fingers represents the direction of magnetic field lines.

Magnetic field at axis at a distance x from centre O.

where, r = radius of the coil, n = number of turns in the coil and I = current,

At centre of the coil, B = μ

If we look at one face of the coil and the direction of current flowing through the coil is clockwise, then that face has south polarity and if direction of current is anti-clockwise, then that face has north polarity.

Every current carrying loop is a magnetic dipole. It has two poles south

(S) and north (N).

This is similar to a bar magnet.

Each magnetic dipole has some magnetic moment (M). The magnitude of M is,

|M| = NiA

where, N = number of turns in the loop,

i = current in the loop and

A = area of cross-section of the loop.

The current carrying loop behaves as a small magnetic dipole placed along the axis one face of the loop behaves as north pole while the other face of loop behaves as south pole.

The line integral of magnetic field induction B around any closed path in vacuum is equal to 110 times the total current threading the closed path, i.e.,

where B is the magnetic field, dl is small element, μ

Ampere’s circuital law holds good for a closed path of any size and shape around a current carrying conductor because the relation is independent of distance form conductor.

A solenoid is a closely wound helix of insulated copper wire.

Magnetic field at a point well inside a long solenoid is given by

B = μ

where, n = number of turns per unit length and

I = current flowing through the solenoid

Magnetic field at a point on one end of a long solenoid is given by

B = μ

A toroidal solenoid is an anchor ring around which is large number of turns of a copper wire are wrapped.

A toroid is an endless solenoid in the form of a ring.

Magnetic field inside the turns of toroid is given by

B = μ

Magnetic field inside a toroid is constant and is always tangential to the circular closed path.

Magnetic field at any point inside the empty space surrounded by the toroid and outside the toroid, is zero, because net current enclosed by these space is zero.

Outside the cylinder (r > R)

B = μ / 2 π l / r

Inside the cylinder when it is made of a thin metal sheet,

B = O

Inside the cylinder when current is uniformly distributed throughout the cross-section of the cylinder (r < R)

B = μ

where, μ

F = q(v * B)

or F = |F| = Bqv sin θ

where, B = magnetic field intensity,

q = charge on particle,

u = speed of the particle and

θ = angle between magnetic field and direction of motion.

This force is perpendicular to B as well as v.

Its direction can be obtained from Fleming’s left hand rule.

Magnetic force acting on a current carrying conductor in a uniform magnetic field is given by

F = I ( I * B)

If we stretch the thumb, the forefinger and the central finger if left hand in such a way that all three are perpendicular to each other, then if forefinger represents the direction of magnetic field, central finger represents the direction of current flowing through the conductor, then thumb will represent the direction of magnetic force.

The total force experienced by a charge moving inside the electric and magnetic fields is called Lorentz force. It is given by F = q(E * v * B)

When charged particle enter normal to the magnetic field it follows a circular path.

The radius of the path, r = mv / Bq

∴ r ∝ mv

and r ∝ 1 / (q / m)

Time period, T = 2πm / Bq

When charged particle enter magnetic field at any angle except 90°, then it follows helical path.

The radius of the path, r = mv sin θ / Bq

The distance travelled by the charged particle in one time period due to component of velocity v cos θ, is called pitch of the path

Pitch = T * v cos θ = 2πmv cos θ / Bq

Cyclotron is a device used to accelerate positively charged particles such as proton, deuteron etc.

A positively charged particle can be accelerated through a modera. electric field by crossing it again and again by use of strong magnetic field.

Radius of circular path, r = mv / Bq

Cyclotron frequency v = Bq / 2πm

where m and q are mass and charge of the positive ion and B is strength of the magnetic field.

Maximum kinetic energy gained by the particle.

E

where, r

When a positive ion is accelerated by the cyclotron, it moves with greater and greater speed. As the speed of ion becomes comparable with that of light, the mass of the ion increases according to the relation.

Where, m = mass of the lOD.

m

v = speed of Ion and

c = speed of light.

(i) Cyclotron cannot accelerated uncharged particle like neutron.

(ii) The positively charged particles having large mass i.e., ions cannot move at limitless speed in a cyclotron.

Force between Two Infinitely Long Parallel Current Carrying Conductors

The force is attractive if current In both conductors is in same direction and repulsive if current 10 both conductors is in opposite direction.

(if the currents is both parallel wires arc equal and In same direction, then magnetic field at a point exactly half way between the wire is zero.)

Torque acting on a current carrying coil placed inside a uniform magnetic field is given

τ = NBIA sin θ

Where, N = number of turns in the coil,

E = magnetic field intensity,

I = current 10 the coil and

A = area of cross-section of the coil,

θ = angle between magnetic field and normal to the plane of the coil.

It is a device used for the detection and measurement of the currents.

In equilibrium, deflecting torque = restoring torque

where, k = restoring torque per unit twist,

N = number of turns in the coil,

B = magnetic field intensity,

A = area of cross-section of the coil and

θ = angle of twist.

The deflection produced per unit current in galvanometer is called its current sensitivity.

Current sensitivity

I

The deflection produced per unit voltage applied across the ends of galvanometer is called its voltage sensitivity.

V

where R is the resistance of the galvanometer.

Therefore for a sensitive galvanometer

(i) N should be large

(ii) B should be large

(iii) A should be large

(iv) K should be small

An ammeter is a low resistance galvanometer used for measuring the current in a circuit.

It is always connected in series.

A galvanometer can be converted into an ammeter by connecting a low resistance into its parallel.

If G is the resistance of a galvanometer and it give full scale deflection for current, I

The resistance of an ideal ammeter is zero.

A voltmeter is a high resistance galvanometer used for measuring the potential difference between two points.

It is always connected in parallel.

The resistance of an ideal voltmeter is infinity.

A galvanometer can be converted into a voltmeter by connecting a high resistance into its series.

If a galvanometer of resistance G show full scale deflection for current I

Others Class 12 Physics Chapters:-